If you don't have Adobe Acrobat, you can download it
here:
Here is the complete procedure as you would perform
it in your practice:
Step 3: Reading the Result
The monitor will show "----" then go to "8:00"
minutes and begin counting down to "0:00." The monitor should stay
on a flat surface during countdown.
When the monitor countdown reaches "0:00", "QCOK"
will appear in the window, then the test result. The two will
alternate in the window of the monitor for up to one week.
If you do not obtain a valid A1C result, you will
get an error code. The error code will stay on the monitor for up to
four hours. Please consult the "troubleshooting section" on the back
of the Procedure Card for information about error codes.
Record the result on the patient label. The label
may be removed and placed directly in the patient chart.
